[MINC-users] 6-parameter fitting with minctracc

[Laurence Mercier]

Hello Andrew,

Thank you for your answer. Your script will be a good starting point for 
me to play with and with your pointers below, I'll know exactly what I 
need to modify (point #1)! Point #3 is ok and for point #2 I need to 
play with the data and see ;-)

Laurence

> Odds are you will have to change a few things,
> 
> 1. the output sampling is the first volume this may not give the
> complete coverage you want
> 
> 2. It may appear more blurry as both are resampled 1/2 way.
> 
> 3. During the fitting an attempt is made to generate an "overlap mask"
> and only calculate the registration for the "most similar" parts thus
> ignoring faces and the likes. This may or may not be applicable to
> your case.
> 
> 
> --
> Andrew Janke
> (a.janke at gmail.com || http://a.janke.googlepages.com/)
> Canberra->Australia    +61 (402) 700 883
> _______________________________________________
> MINC-users at bic.mni.mcgill.ca
> http://www.bic.mni.mcgill.ca/mailman/listinfo/minc-users