[MINC-users] Display and slice plane rendering

[Andrew Janke]

Hi Soren,

Not sure if anyone posted a reply to this so here is how I do this
(when I have to) Display does not have the best documentation!

First place the cross hairs in the 3D view on a place that you want in
your oblique view.  then..

 1. Press 's' for Slice View

 2. Press 'r' to make sure things are visible

 3. Press 'e' (Pick slice Angle).

Then click somewhere else in the image that you want in your oblique
view.  after a few hacks at this (#3 only) you will get the hang of
it.


a

On 9/10/07, Soren Christensen <sorench at gmail.com> wrote:
> Hi,
>  I am trying to create a 3D sliceplane rendering from an arbitrary
> slice plane but have problems doing this in Display.
> I:
> 1) turn on the "fourth window" in Display (S-S)
> 2) Toggle on the cut plane in the 3D window (S-Q) and orient it as I want.
> 3) Try to do S-A from the fourth window in order to render the
> arbitrary slice-cut to the 3D window.
>
> Step 3 is where I have the problem. I cannot render the arbitrary
> slice-cut to the 3D window. The other standard view planes render
> fine.
>
> If this functionality is not available using the approach above, is
> there pherhaps another way to achieve it? eg. resampling volume
> differently or so?
>
> Thanks
> Soren
> _______________________________________________
> MINC-users at bic.mni.mcgill.ca
> http://www.bic.mni.mcgill.ca/mailman/listinfo/minc-users
>


-- 
Andrew Janke   (a.janke at gmail.com || http://a.janke.googlepages.com/)
Canberra->Australia    +61 (402) 700 883